OHAUS SHRC0719DG Digital Reciprocating Shaker

Send a message
OHAUS SHRC0719DG Digital Reciprocating Shaker

OHAUS SHRC0719DG Digital Reciprocating Shaker


New product

  • 15 lb shaking capacity; 20-300 RPM speed
  • LED displays and digital touchpad control
  • Adjustable speed, tilt angle and time
  • Calibration mode for speed
  • RS232 Interface for two-way communication
  • Load sensor that adjusts RPMs to safe speed
  • Included tray size: 11 x 13"
  • Timer: 1 second - 160 hours
  • Speed ramping and overload protection
  • Contact us for availability

More details

Our Price: $1,827.50

Brand: OHAUS

More info

OHAUS SHRC0719DG Digital Reciprocating Shaker

The OHAUS SHRC0719DG Digital Reciprocating Shaker features high end digital functions paired with dependable hardware. The variable speed, microprocessor control provides consistent, uniform shaking action with 1 RPM adjustments. The microprocessor displays the last setpoint and will restart if power is interrupted. Digital touch pad controls are easy-to-read and independent LED displays for speed and time allow operators to view both settings at once. Provides repeatable and accurate results every time and is easily visible across lab benches. Timer will display elapsed time or, when programmed to user defined limit, will shut off unit when time reaches zero. Display will show last used settings, even after power has been turned off. In addition, the system features RS-232 interface for bi-directional data logging and unit control. Speed can be calibrated using the automatic recalibrate speed display. 


Safety features include speed ramping which helps provide liquid splashing and overload protection. The spill-resistant design channels liquids away from internal components. Overload protection uses audio and visual displays to indicate unsafe conditions of overloaded or obstructed tray. Built-in Load Sensor reduces RPMs to a safe speed when tray unbalance is detected. The SHRC0719DG utilizes a singe eccentric drive system via a brushless DC motor with permanent lubricated ball bearings.


Each shaker is provided with power cord and plug plus a 11 x 13" platform with non-skid rubber mat. Accessories are sold separately and can be found under the accessories tab.


  • Microprocessor control ensures consistent repeatable results
  • RS-232 Interface for bidirectional communication
  • Low profile design allows use in smaller spaces
  • Independent LED displays for speed and time
  • User-friendly touchpad controls
  • Timer features audible alarm when it reaches zero
  • Speed ramping helps prevent spilling
  • Overload protection with audible and visual signals
  • Single eccentric drive with burshless DC motor
  • Speed calibration mode
  • Load sensor automatically adjusts speed upon detection of unbalanced load
  • Adjustable 20-300 RPM speed range
  • Platform size: 11 x 13" (rubber non-skid mat included)
  • Timer: 1 second - 160 hours
  • Applications: Cell cultures, solubility studies, and extraction procedures


MotionReciprocating, 19 mm stroke
Capacity15 lbs (6.8 kg)
Tray Size (LxW)11 × 13" (27.9 × 33 cm)
ControlDigital, LED Independent Displays
Timer1 Second to 160 Hours
Drive SystemBrushless DC Motor, Single Eccentric
Speed Range20 RPM - 300 RPM
Speed AccuracyAbove 100 rpm ± 1% of set speed, below 100 rpm ± 1 rpm
Dimensions (LxWxH)16.3 × 14.0 × 5.8" (41.3 × 35.5 × 14.6 cm)
ConstructionCold Rolled Steel CRS
Tray MaterialAluminum
Power120V, 5A, 50/60Hz
Power Consumption40 W
Safety CertificationTUV
Working Environment14°F – 140°F, 80%RH, non-condensing
Weight49 lbs (22.2 kg)
Ordering InfoOHAUS 30391828

30 other products in the same category: